4824ND-2 – 8ft 0″ Long Exhaust-Only Wall Canopy Hood with Built-in 3″ Back Standoff
– 430 SS Where Exposed
– FILTER – 16″ tall x 16″ wide Kleen-Gard Stainless Steel Baffle Filter with Handles and Bottom Hanging Hook, UL Classified
– L55 Series E26 Canopy Light Fixture – High Temp Assembly, Includes Clear Thermal and Shock Resistant Globe (L55 Fixture), Bulbs By Others
– EXHAUST RISER – Factory installed 14″ Diameter X 4″ Height
– 1/2 Pint Grease Cup New Style, Flanged Slotted
DU85HFA High Speed Direct Drive Centrifugal Upblast Exhaust Fan with speed control (speed control included for single phase only), disconnect switch and 15-3/4″ wheel.
Exhaust Fan handles 2000 CFM @ -1.000″ wc ESP, Fan runs at 1434 RPM.
Exhaust Motor: 0.750 HP, 1 Phs, 115 V, 60Hz, 8.9 FLA, TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)
– Grease Cup for kitchen-duty centrifugal exhaust fans,
Box Dimensions 17-1/8 L X 5-1/16 W X 3-3/4 H (20 GA.) (Includes Down Spout)
– ECM Wiring Package and Manual or 0-10VDC Control for Exhaust EC motors. RTC Controller (No harness when ordered as a part).
– Miami Dade Impact and Wind Load Certification +150 / -150 PSF – Miami Dade County Product Control Approved. Florida Building Code approval. Roof & Wall Mount Exhaust Curbs up to 20″ high must be 20 gauge Aluminized. Roof & Wall Mount Exhaust Curbs above 20″ high up to 42″ high must be 16 Gauge Aluminized.
– Curb CRB23X26E On Fan #1 3.000:12.000 Pitch *** 16 Gauge Construction.
– Hinged Base for Curb. Standard Hinge attached to curb. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized. – Vented Base for Curb – Full Bottom Curb Corner. Base flange corners fully welded or staked by factory. (P1) DW1423LT Single Wall Duct 14″ diameter, 23″ long, flange at both ends. Stainless Steel.
(P2) DW1424AJDKIT Single Wall Duct Adjustable, 14″ diameter, 23.5″ long, flange at one end With a 14″ Adjustable Collar – Stainless Steel. (P3) DW2312TP Duct to Curb Transition, 23″ Curb to 12″ Duct, 16 GA Aluminized. Misc. non-standard transition plate.
3M-2000PLUS Duct – 3M Fire Barrier 2000 Plus Silicone – Used as sealant to Seal Duct Joints.
DW14CLASY Duct “V” Clamp With new design 14 Ga Brackets, 14″ Duct, Assembly.
Exhaust Hood & Fan 8′
4824ND-2 – 8ft 0″ Long Exhaust-Only Wall Canopy Hood with Built-in 3″ Back Standoff
– 430 SS Where Exposed
– FILTER – 16″ tall x 16″ wide Kleen-Gard Stainless Steel Baffle Filter with Handles and Bottom Hanging Hook, UL Classified
– L55 Series E26 Canopy Light Fixture – High Temp Assembly, Includes Clear Thermal and Shock Resistant Globe (L55 Fixture), Bulbs By Others
– EXHAUST RISER – Factory installed 14″ Diameter X 4″ Height
– 1/2 Pint Grease Cup New Style, Flanged Slotted
DU85HFA High Speed Direct Drive Centrifugal Upblast Exhaust Fan with speed control (speed control included for single phase only), disconnect switch and 15-3/4″ wheel.
Exhaust Fan handles 2000 CFM @ -1.000″ wc ESP, Fan runs at 1434 RPM.
Exhaust Motor: 0.750 HP, 1 Phs, 115 V, 60Hz, 8.9 FLA, TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)
– Grease Cup for kitchen-duty centrifugal exhaust fans,
Box Dimensions 17-1/8 L X 5-1/16 W X 3-3/4 H (20 GA.) (Includes Down Spout)
– ECM Wiring Package and Manual or 0-10VDC Control for Exhaust EC motors. RTC Controller (No harness when ordered as a part).
– Miami Dade Impact and Wind Load Certification +150 / -150 PSF – Miami Dade County Product Control Approved. Florida Building Code approval. Roof & Wall Mount Exhaust Curbs up to 20″ high must be 20 gauge Aluminized. Roof & Wall Mount Exhaust Curbs above 20″ high up to 42″ high must be 16 Gauge Aluminized.
– Curb CRB23X26E On Fan #1 3.000:12.000 Pitch *** 16 Gauge Construction.
– Hinged Base for Curb. Standard Hinge attached to curb. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized. – Vented Base for Curb – Full Bottom Curb Corner. Base flange corners fully welded or staked by factory. (P1) DW1423LT Single Wall Duct 14″ diameter, 23″ long, flange at both ends. Stainless Steel.
(P2) DW1424AJDKIT Single Wall Duct Adjustable, 14″ diameter, 23.5″ long, flange at one end With a 14″ Adjustable Collar – Stainless Steel. (P3) DW2312TP Duct to Curb Transition, 23″ Curb to 12″ Duct, 16 GA Aluminized. Misc. non-standard transition plate.
3M-2000PLUS Duct – 3M Fire Barrier 2000 Plus Silicone – Used as sealant to Seal Duct Joints.
DW14CLASY Duct “V” Clamp With new design 14 Ga Brackets, 14″ Duct, Assembly.
$4,595.95
Out of stock
